DirectFix.com introduces the iPhone 6S artillery replacing video please speak the following warning beforeattempting this restore you are doing this repair at your own risk abusing a pentalobescrewdriver from directfix.com remove the two bottom pentalobe srews working a suit opener tool and a suctioncup left gently up the screen and pass the suit opener tool around the edges toseparate the adhesive with the adhesive separated use thesuction cup to pull the screen up gently do not pull all the way out as there are cables affixed keep the screen at a 90 degree tilt as you might rip the cables if you go too far expending a double zero Phillips screwdriverremove the two pins on the shield that’s enveloping the battery connector you can now remove the battery shieldcover expending plastic pry tool removing the batterycable up from the connector there are two adhesive drag invoices you are going to need to lift up and towards the back of the phone once you have the draw tabs up pull them back towards the back bottom of the phone you should come right out if there is still adhesive you might need to use a plastic spudger to attract the artillery up don’t worry you’re replacing thebattery anyways once you have this spudger all the wayunderneath you can pry the artillery up exercising the leftover adhesive or installsome doubled placed strip go ahead and named the artillery in place you are now going to reconnect the relate cable to the connector for the artillery back to the shield and is moving forward and shafted in the two screws you may now bring the screen down and start theprocess of getting the screen back into the frame of the case with the screen the whole way in you cannow insert the two pentalobe screwing is moving forward and turn on the phone and check tomake sure your new batteries wreaking and you’re all set to go for all parts and supplementary needs pleasego to our website directfix.com too be sure to click on the screen tosubscribe to our YouTube channel
