Today I’m here with a tutorial testify youhow to jailbreak your iPhone, iPod touch or iPad on the latest iOS4. 3.1 firmware. Now before we begin there are a few thingsI do want to mention. First of all this is only going to work onWindows computers, if you have a Mac you can still do the jailbreakhowever you’re going to need to use PwnageTool which doeswork fairly similarly however there are some key differencesso you’re going to need to find a separate tutorial on that.The second thing is the device compatibility, this will work withthe iPhone 3GS, the iPhone 4, the iPod touch 3rd and the iPod touch 4thgeneration as well as the iPad 1. What this does not support is theiPad 2 which will be coming in a later jailbreak. This jailbreak is tethered, now what tethered wants is that you will need to plug your iPhone, iPod touch or iPad into the computer and rerun the jailbreak everysingle duration it shuts absolutely off. This definitely is pretty annoying and that’sone of the reasons why I only recommend this is if you’re an advancedjailbreaker.If you have never jailbroken before at thevery least I do recommend at least learning a little bit about whatdifferent things do, you are familiar with, some of the terminology and all of that kindof trash before proceeding with the jailbreak. Okay so to do the jailbreakwe’re going to need two things. The first of which is the sn0wbreezeprogram itself. I will have a link in the description, downloadthat, that’s no big deal.Now the second one, it can be a little bitmore complicated but shouldn’t be a big deal is your firmware foryour device. So the firmware is obviously going to needto be 4.3.1 and it needs to be the chastise firmware for yourdevice, so you can’t use you know, an iPhone firmware on an iPador anything like that it needs to be the correct firmware. Now there area couple of ways of get this, the first one is just to find it onyour computer, I will have a link in the specific characteristics, for example there’sa very good chance that iTunes might have already installed, already downloaded it in which case you can just drag it and dropit onto your desktop , no big deal at all.Otherwise if you havenot done that I will have a download connect where it is possible really downloadit, takes only a few minutes and you’re going to begood to go. So once “youve had” both the firmware and sn0wbreezedownloaded you need to go ahead and connect your devicevia USB to your computer. Now this is not one hundred percent necessarybut I clearly highly recommend it and allow it to do a full sync, back up all of your music, your apps, your contacts, photos, all thatkind of good stuff have it all backed up in iTunes so we canget all that data right back as soon as we’re done with the jailbreakyou shouldn’t lose a thing.So let’s open up sn0wbreeze and give you guysa little demo of how it drives, so here we go this is sn0wbreeze, you can do check for modernizes but if you’ve just downloadedit it shouldn’t be a big deal so exactly click ok and we can click next. It’sgoing to be a little laggy now. Close recognitions, so first thing is it’s goingto ask us for our IPSW , now that is that firmware register that we either downloadedor spotted so you can only download it or whatever you can do so I’lljust draw it in there and it will take just a second to identifythe IPSW and then it will realize what device we have, firmwareand all of that kind of stuff.Once it properly identifiesour firmware as well as our maneuver we are ready to continue. So justclick next , now you will find that there is a simple modeand expert mode. Now if you do have an iPhone you’ll read a baseband preservationmode however I’m not going to be getting into that justclick expert state and continue. Now there are going to be a few options, we’rejust going to I’ll give you guys a quick overview of themso we’re going to start with general, and there are going to be afew things here. Now these options are all optional howeverI certainly recommend there is a couple of them that you need todo, so for the iPod touch 4th generation and do keep in mind that someof these will change a little bit differ the devices but you’llprobably want to enable artillery percentage as well as gestures menuyou can also install SSH I generally don’t do that, I like to justwait and install it last-minute but what you will want to do is make sure that this boxis checked, install working MobileSubstrate that will make sure that many of the greatapps such as WinterBoard and etc etc will properly work on 4.3.1. You canadjust the root separate width but I don’t really recommend that, just leaveit as is. Next step, download patronage apps if you have apps, packages, informants, any of that you can add them into the IPSW, again not necessaryat all but the option is there if you like. So formerly we’ve got all that donethere’s not really a whole lot time check erect IPSW and click next. So theIPSW does make quite a bit but what ih8sn 0w has done, of course the developerof sn0wbreeze, is allow you to play PacMan while it’s loadingso if you guys want you can play a little bit of PacMan, I’m not goingto do that right now but that’s there and you know you can have a littlefun while it’s waiting. Anyway people, this is going to take a littlewhile so I will be right back as soon as it’s done. Okay so it’s all done. Before we begin wewant to make sure that it did work properly so you should interpret on your desktopthe sn0wbreeze IPSW as well as a folder that says iBooty for 4.3.1. This is going to be very important but we’re not going to use thisjust yet what we do need though is the IPSW so formerly you see that and you doget the done screen we’re ready to continue on and actually get theIPSW loaded.So at this spot you should have your iPod or iPhone connectedor of course iPad connected via USB you know it’s backed upand all of that kind of stuff and we’re going to placed the iPod or the iPhoneor whatever into a DFU mode state. So we’re going to make this over only a littlebit now and I will give you guys a demo of how to do it.So we just need toshut off our design now so pretty simple you time deem the strength button downand until you get the slip to capability off and, try to do it rightand then just let it shut off now you want to make sure that the pinwheelhas stopped and that the screen is totally off to make sure thatit is actually off. So now what we’re going to do if I simply adjustthis is that we’re going to give it into DFU mode, I will amble you guysthrough it but of course there are instructions on screen exactly followthose “when youre doing” the tutorial, so we’re going to click start andwe’re going to prepare to press the power and the residence so ready, mounted, go, supporting them both we’ll brace them for 10 seconds so we’ll letit tally us down here. About ready to release the superpower button, releasethe superpower button and continue holding the residence button, so thereyou go it says 30 seconds typically it takes about 10 secondsbut we’ll precisely continue supporting it until it leaves us theokay.So it sounds like it’s about done, there we go so now it is running iREB andwe’re ready to roll so there we go as you guys can see it saysyour design is housed in a pwned DFU mode state and we’re readyto begin. Now at this degree iTunes should automatically open up, if itdoesn’t just open it yourself and it should pop up with a thingsaying it has identified a design in recovery mode, so we can go ahead and clickokay, and now we need to restore that firmware onto our deviceso to do it you need to hold the shift button down on your keyboard, so while you’re impounding displacement click reinstate with your leftmouse button. Then it is desirable to open up a little dialog now and just scrolldown to your desktop and adopt that sn0wbreeze IPSW that we just made.Click open, just say yes, restore and again this will make just a littlewhile so get it started, sit back chill out for a few minutes and I’ll be backwhen this one is done.Okay so it just finished up. So as you guyscan see here everything looks pretty much stock except for the additionof Cydia. However we are not quite done yet as you can see hereif you click on Cydia is does not do anything. So the last stepis going to be running iBooty. Okay so to get the device to boot properlywith all of our jailbreak nips and what not we are going to need to run iBooty.And of course iBooty should be on your desktop as soon as sn0wbreezemade your IPSW it should have done the file there, and youjust need to open up the iBooty executable file and we’re going tobe good to go.So as you can see here super simple it will askus to select our manoeuvre, patently, hopefully you’re not jailbreakingmore than one at a time, then we just need to click start. Now theway this is going to work we’re going to do into DFU, you guys shouldknow the drill, do the exact same thing as before. Okay so formerly iBootyis finished iTunes will most probably pop up again with the samestuff, however this time we don’t need to restore at all so we canjust close out of this, and pull in our manoeuvre. Now it will make justa hour to boot up but take a look here now if we open up Cydia youshould find that it actually runs just fine. So it’s going to want usto connect to Wi-Fi and all that kind of stuff, I can do that laterbut as you guys can see here Cydia does work and we are officiallyjailbroken. If you found this video helpful be sure to subscribe, Ido lots of other jailbreak videos and all kinds of stuff like that andif you had any problems or a matter of the jailbreak definitelylet me know in the comments below and I will do my best to help you out.
